Program ps3 controller

If this button reads Turn Bluetooth Off instead, Bluetooth is already enabled. Connect the PS3 controller to your Mac. Attach the small end of the charger cable that came with your PS3 controller to the controller's charging port, then plug the other end into your Mac's USB port.

You can find them on Amazon and in tech department stores. Let the controller charge if necessary. If the controller hasn't been charged for a while, you may want to let it charge for about 30 minutes before proceeding with setting up the Bluetooth connection. Press and hold the PlayStation button for 2 seconds. It's in the middle of the controller. Doing so will prompt the lights on the top of the controller to begin flashing. Unplug the controller and wait for it to sync.

The PS3 controller will appear in the list as "Connected" after a few seconds. Enter as the passcode if prompted. If your Mac prompts you for the device's passcode, type and then click Pair.

This usually isn't required on newer Macs. Set up your controller in-game. Now that the PS3 controller is connected to your computer via Bluetooth, you can use it in any game that supports gamepads. You may have to manually set the controller buttons for game functions; this varies from game to game. Yes No. Not Helpful 1 Helpful 6. I lost the USB to a controller without a charger port.

How do I connect it to my PS3? Press the reset and PS button for 3 seconds. And have the PS3 off for it to work. Not Helpful 5 Helpful On the back of your controller there should be a small hole on the upper part closer to the side that contains the D-pad.

This hole contains a Reset button that can be depressed with any long thin item such as a fork prong or a small screwdriver. This should cause the controller to search for nearby PlayStations to sync with. Not Helpful 8 Helpful 9. Not Helpful 0 Helpful 2. It should but make sure that your remote is plugged into the PS3 with the USB cable or it won't work.

Not Helpful 26 Helpful 5. Not Helpful 20 Helpful 4. You have to buy the cord or you have to have the original controller that came with the PS3. Not Helpful 5 Helpful 3. Use the plug in via USB and select the middle home button, allow a few seconds for it to register, and you are ready to play.

Not Helpful 8 Helpful 1. You cannot do that, due to the incompatibility of the two softwares. Not Helpful 3 Helpful 1. Not Helpful 1 Helpful 2. Include your email address to get a message when this question is answered. Updating your PlayStation 3 can fix some connection issues for your controller. Helpful 2 Not Helpful 0. If your first few attempts to connect your PlayStation 3 controller to your console or computer don't work, try using a different still Sony PlayStation 3 controller.

If a different controller works, your first controller is probably broken. Helpful 1 Not Helpful 1. Connecting a PlayStation 3 controller to a Windows computer can be an unreliable process due to Microsoft's aversion to Sony products.

Helpful 1 Not Helpful 4. You Might Also Like How to. How to. About This Article. Written by:. Co-authors: Updated: September 18, Categories: PlayStation 3. Italiano: Sincronizzare un Controller per PS3.

Then, run the installer, accept the terms, choose your install location, and then you'll get a menu of all the options to install. Just leave this to the default and click Install to begin the installation.

Step 4: After about 30 seconds, ScpToolkit will be installed successfully, and you'll be required to Run Driver Installer. Then, check the boxes for the drivers you want to install. In this case, you should check " Install Dualshock 3 driver ", and then click the arrow next to " Choose Dualshock 3 controllers to install " to open a dropdown list.

From the list, check PlayStation 3 controller. After SCP Toolkit is installed, you can open ScpToolkit Settings Manager to change some settings like disabling rumble, adjusting analog stick deadzones, and more.

PS4 controller is blinking white? How to fix the problem? In this post, you can get 4 solution to it. Try them one by one until it is fixed.

Download ScpToolkit and run the installer. After accepting the terms and choosing your install location, you'll get a menu of all the options to install, as in the screenshot above. I recommend leaving this to the default. Click Install to begin the installation. After about 30 seconds, ScpToolkit will be installed, and you'll see this screen, with a big green button that says Run Driver Installer.

Since this is a fresh install, that's what we want to do. Click the button. This screen may look intimidating, but it's still pretty simple! Check the boxes for the drivers you want to install. In this case, we want to make sure Install Dualshock 3 driver is checked it should be by default. Now click the arrow next to "Choose Dualshock 3 controllers to install" to see a dropdown list of USB devices attached to your computer.

Find the PlayStation 3 controller in the list and check it. Bluetooth installation note: Make sure the "Install Bluetooth driver" box is checked. Like you did with the Dualshock 3, click the arrow next to "Choose Bluetooth dongles to install" and find your Bluetooth device in the list.

Check it. Click Install. Watch the SCP Toolkit run through its installation process. You'll see lots of pop-ups on the side of your screen as it detects your hardware.

Scroll to the bottom of the log and you should hopefully see "Dualshock 3 USB Driver installed" and "Bluetooth Driver installed" if you chose to , signifying a successful installation. If all went well, click Exit. Now that it's installed, you'll see ScpToolkit as an icon in your system tray.